daleks

No Stowe

Part of my #makenine2017 was to make a bag similar to the Stowe Bag by Grainline Studio. If you’re not aware of this little tote, you have to check out all the different versions.  It’s too adorable!

I do have a tendency to make my own pattern for any bags that I make. I studied the Stowe bag and I liked the size. I started there with my measurements. The bottom should measure about 5″ x 9.5″. That’s a nice sized handbag. I couldn’t decide how I would incorporate the handles and the fabric that I wanted. And this is where any resemblance to the Stowe bag disappeared.


What I ended up with is an alternating fabric using my suede-like fabric along with Daleks fabric. This is super similar to the makeup bag that I made the bestie for xmas. I loved that little bag so it’s not really surprising that I’m making this so similar. The construction is even about the same.  Did that statement just take out all of the air of this blog post.  Well I don’t care! I’m excited about my own ‘little can of hate’ bag!


I did add a little bit of Dalek on the inside of the bag.  It’s cute and happy yellow gingham but I stitched in “exterminate” around on the bottom.  It was almost 2 am and it sounded like a good idea.  It did not strike me that I will only see this when I’m desperately digging through my bag hunting down something that I swear is in there. It might not amuse me as much as it did stitching it during my late night sewing session.


The measurements came out to what I was intending for the base.  I put this bag together thinking of not closing the top completely. I only wanted a flap I could secure to keep things from falling out or other people digging in.  Not connecting the flap on the sides of the bag kept it from keeping the boxy shape that I liked.  I did some quick stitching and attached a few points on the flap to the bag’s body to help pull in the wandering sides.
After using the bag for a week or so, I realized the handles could be about an inch or so longer. I could have also dropped the flap down about an inch into the bag instead of putting it right at the top like I did. It’s a little flimsy even though I used interfacing on the gingham. A stronger interfacing would have fixed this.

Super short little post for an angry little bag. 🙂

3 items left on my list! Sewaholic Thurlows, Burda Flares and rainbow belt. A little over 5 months left and I have everything I need to make them. If I can’t complete this, I have a serious case of the “lazies”.

IMG_2925

Advertisements

Little Can of Hate

This is my last holiday post guys. I’ve been on a roll of unselfish sewing! I am the most amazed by all this. A Hubby shirt, a clutch and now a makeup bag. I always make something for my bestie for the holiday. I originally was going to make her a clutch bag but the more I thought about it the more I realized that she wouldn’t use it. It’s just not her style at all. I had to brain storm and quickly. Again, I went to Pinterest and went through all the bags I had pinned. I found a box style makeup bag. I can work with that. I happened to pick up some Doctor Who fabric from the remnant bin at Jo-Ann’s. I’ve been scoring big time lately!

A lot of my non-pattern makes come with a lot of sketching. The pin I found had dimensions for quite a large box bag and I didn’t really understand how it was put together. I even made it out of paper and it still didn’t come together right. I spent way more time than I’d like to admit on trying to figure out the proper dimensions so if you want to make one I’ll save you some frustration, here’s a tutorial.

Finished Dimensions: 7 1/2″ x 3″ x 3″

All seam allowances are 1/2″

You’ll need:

  • 11 1/2″ x 13″ lining fabric
  • 11 1/2″ x 13″ outer fabric
  • 11 1/2″ x 13″ interfacing
  • zipper


First cut out all your pieces.


This is my lining. You’ll notice in other pics I made the outer piece two different fabrics. Pretty much, if you want to do that, you’ll cut the sides where they join a 1/2″ too wide. This way the fabrics will overlap 1/2″ so you can join them. Ta-da!

Putting the lining together is pretty quick. Iron your interfacing to the wrong side of your lining, like ya do. Then start sewing!


The outer short piece comes to the inner piece right sides together. Make sure to fold the edge of the short piece towards the interfacing side along the length before sewing. This will make a nice edge for the inside near the zip.


Do this for both short pieces.


This part is hard to photograph. Next push the seam you just made to the center of the neighboring hole. Line up the edges and stitch. Do this on both sides.


You’ll see that this makes a box on this finished side. Repeat on the other end. Your lining is complete.

image
Completely did not take pictures of me sewing in the zip but trust me, you do not want me to teach you to sew in a zip. Mine are pretty questionable sometimes. Let’s move to the outer fabric. Start by pressing the long edges of the short pieces in 1/4″. Pin your zipper to the pressed edges. My zipper wasn’t long enough so if yours isn’t either, that’s okay. I added fabric the same width as the zipper to the end of the zip. (You can see it in the pic above)  The length of your zip or zip + extender should be 11 1/2″, which is the full length of the pressed edge.

image

Stitch the zip into place. I did this one well. 🙂

Complete the outer piece just like the lining.  Make sure to leave your zip partway open before completing all your sewing, otherwise you can’t turn it! If you want to add a pull tab, make sure to add it before stitching the first edges down. Mine was about 1″ long after I folded it in half. It should be place in between the right sides of the fabric towards the bag.

image

At this point you should have two bags; inner and outer. To attach the lining to the outer bit, I hand stiched the two together at the zip.  I left the outer bag unturned and worked my lining over the outer. The interfacing should be against the wrong side of your outer fabric. I found it easier to sew this way. I did a blanket style stitch all around the zip. It was nice because I used the yellow squares or every other column, as my guide for each stitch. It made it so uniform all the way around.

image

Once completed, I turned the whole bag around the right way. I pressed the box edges to make them nice and crisp. It gave it a less bloated look.

image

You can see even with the shortie zipper, you can still get the bag open really wide.

image

Just to really personalize the bag, I added her name in gold and a teeny tiny heart on the bottom.

What would I change? I would put a pull tab at each end and make the width on the short pieces a 1/4″ wider on the outer fabric. I think the fabric could stand to be a bit closer to the zip. I’m really happy with the bag. It turned out the size I hoped for and I really wanted to keep it so I know I did a good job. If it was just okay, there would be no reservations in letting it go.

If you don’t know why I called this post Little Can of Hate, please enjoy the comic below. (Sing to the tune of Soft Kitty)